JAACO CORPORATION  

The most powerful air coil pin tool on the market, the NPCN-7312 is designed to drive ballistic pins into concrete, block, and steel. This is the only standard air tool on the market that has an operating pressure rated from 80psi to 175psi (normally 80-120 psi for other air tools).

Attachments available to install NailPro 1 7/8” Poly Washers

In addition, this tool drives any 15 degree wire coil nail from .099 to .145 shanks to 3 ½” lengths

Typical Applications

EIFS continuous insulation panels to concrete, block, steel, and wood with any of our poly or metal washers
Lath to rigid insulation panels to concrete, block, or steel
Plywood/OSB® to steel framing, concrete, and block
Cement fiberboard siding or panels to steel framing, concrete, and block
Zip Board® System R Sheathing
Attach DensGlass® to heavier gauge steel, concrete, or block
Attach 2 x 4 and 2 x 6 plates to concrete exterior walls

Specifications

Shank diameter 0.100" to 0.145" & 1-3/8" to 3-½" smooth or knurled  pins
Adjustable Dial A Depth control to easily adjust for flush or slight set
Nail Collation: 15 degree wire
Load Capacity: Up to 200 pins
Weight: 8.5 lbs
Operating pressure: Up to 175psi

A light and powerful tool that attaches multiple materials to concrete and steel. It comes with a patented 0 deg. plastic collation. Ballistic pins for this tool are available in smooth and knurled shanks. A sequential fire system allows the use of washer attachments to install metal washers. The most common magnetic attachment holds our 1 ¼” MW114 metal stucco washers. When the tool is activated it drives the pin & washer to secure the stucco lath or mesh to block, concrete or steel. The simple dial a depth control assures the lath is secure to the wall.

When working with plywood, cement board or backer board this feature allows for a flush or slight set.

Typical Applications

Stucco lath or mesh to block, concrete and steel
Drywall track to concrete

Hat cap channel to concrete and block
Plywood underlayment to concrete and steel
Tack-less carpet strip to concrete
Plastic wrap to concrete, block, and steel
Wood or metal furring strips to block or concrete
 

Specifications

Shank: 0.106"  drives from 1/2" to 1 1/2" X .106 Strip Pins      

Long Magazine Load Available
Dial-A-Depth Adjustment for easy flush set
Nail Collation: 0 deg. plastic
Load Capacity: 30-40 plastic strip pins
Tool weight: 5.6 lbs

Interchanges with many gas concrete pin tools.

One of our most popular air tools because of its size and power, this coil pin tool is designed to attach most siding materials to steel and wood framing. This tool drives ballistic pins or standard wire coil siding nails from 1 1/4" to 3" lengths. It can easily drive up to 12 gauge steel and comes with sequential fire. Its seismic force design and hurricane wind loads comply with current ICC-ES testing standards.

One of the most typical applications is attaching lath with MW114 metal stucco washers to concrete, block, and steel. This tool also comes with Dial-A depth adjustment for flush or slight set. 

In addition, this same tool can drive any 15-degree wire coil nails. For wood siding simply load .083 to .113 ring shank nails. For wood  applications load  3” x.131 coil framing nails.

Typical Applications

Lath to DensGlass® & SecuRock® to steel or block
DensGlass® to steel
Plywood to steel

Cement board to steel
Insulation panels to steel
HardiePlank® to steel
Lath to plywood and steel
Regular wood to wood siding

Specifications

Shank Size for steel: 0.100", 0.145" Pins 

Shank Size for wood: .083 to .131 siding or framing nails
Length: 1 1/4" to 3"
Nail Collation: 15 degree wire
Load Capacity: 200 pins
Tool weight: 7 lbs

NailPro introduces the first One of a Kind Roofing Coil combination tool.

This multi task tool will usually get the job done in half the bid time of any screw system.

One Tool Drives 3 different fasteners for multiple applications

Roofing Nails – 2” to 3 ½”

1 Hour Firewalls - Code requires a minimum 1 7/8” Roofing Nail

2 Hour Firewalls - GP® Densglass now requires a minimum 2 3/8” Roofing Nail

Rigid Insulation Panels for walls and roofs to wood - 2” to 3 ½” coil nails

Lath to rigid insulation to wood – 2” to 3 ½” roofing nails

Standard ridge vents - 2” X .120 roofing nails

High Cap ridge vents - 2 ½” x .120 roofing nails

Zip Board® R Sheathing to wood - 2” to 3 ½” roofing coil nails

Ballistic Pins – 2” to 3 ½”

EIFS Rigid Insulation Panels to steel framing

Zip Board® R Sheathing to steel framing – 2” to 3 ½” Ballistic Pins

ROXUL® insulation panels to steel

Lath to rigid insulation to steel

Framing Nails – 2 ½” to 3 ½” X .120 or .131 shank

Any 15-degree wire coil framing nails for wood to wood applications

Specifications

Shank: 0.120", 0.131"
Length: 2-1/2" ~ 3-1/2"
Nail Collation: 15 degree wired
Load Capacity: 120 nails
Tool weight: 8.3 lbs