E-Z Weld Wet Weld is a medium bodied, fast set PVC Solvent Cement. This cement is formulated for use on PVC pipes and fittings. It may also be used on small diameter pipes and fittings. A cement offered for wet conditions and or quick pressurization. Making a joint while water is present is very risky. Care must be taken and water from the joining surface should be removed. If moisture is still present on the joining surface, work quickly and a longer cure time should be allowed. When joining large diameter pipe & fittings the use of primers is highly recommended.
- Blue, medium body, PVC / uPVC cement for use on pipe and fittings up to 6” (160 mm) diameter for schedule 40 and 4” (110 mm) for schedule 80
- A cement offered for wet conditions and/or quick pressurization
- Suitable for plumbing, pressure/non-pressure applications, irrigation, electrical conduit and DWV
- Can be used without primer on non-pressure systems if local codes permit
- Very fast set
- Meets ASTM D2564
For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy or jelly like. Always follow instructions on the label.