Pour obtenir des instructions en français, cliquez sur l'onglet « Français » dans le coin supérieur droit de cette page.

Login to apply for exhibit space. 

The printed Show Guide, published by IMB Magazine, will be in French only.

Confirmed exhibitors can login to update their eBooth details. 
Please enter details for your eBooth (Online Listing) in English and French. See the two tabs on the EDIT BOOTH INFO page.

  • Booth: 734


** Don't forget! To visit us at MCEE's new products booth **

Visits us and ask your questions to our seismic engineers!!!

Québec Manufacturer of strut channel designed to simplify the installation of seismic rod stiffener and trapeze suspension . Its unique design, 'W' shape, greatly increases load resistance.

With our 'Made-in Québec' quality insurance and engineer approved, you can replace your regular strut for 85% to 100% of all of your seismic and trapeze suspension on a job site.  Perfect fit for multiple applications: plumbing, electricity, ventilation ducts, refrigeration and more.

  • Made of galvanized steel G90, 22 ga. and 18 ga.
  • Profiled and pre-preforated
  Seismic         Cheapest and simplest way to do a rod stiffener, engineer approved
  Fast               Pre-holed and easy to cut reduces installation time
  Strong           Over a secure 1000 pound load for 24'' wide
  Economical  As opposed to a “Cantrust” or a galvanized iron angle
  Versatile        Unique design allows for multiple applications and utilisations
  Safe               Borders rounded up towards the inside reduces the risk of cuts
.
Let's put money in your pocket, save time and avoid injuries!

Brands: TS2-22 & TS2-18: Rod Stiffener & Trapeze Suspension 2''x3/4''x10' - 18 ga. TS150 : Suspension 1-5/8''x1-5/8''x10' - 18ga.


 Products

  • TS2-22 / TS2-18
    Suspension & Seismic Strut...

  • Galvanized G90 steel strut channel used for trapeze suspension of ventilation ducts.

    Québec Manufacturer producing a strut channel with a unique 'W' shape design that increases the load resistance while remaining light. Pre-holed holes of 25/64" in the strut center allow a 3/8" threaded rod to go through. Its size of 2" X 3/4" W X H allows easy duct suspension. Two choices of thickness, 22 gauge and 18 gauge. Available in both 8 feet or 10 feet length. It can be cut with metal snips and rounded up borders towards the inside reduce the risk of injury in the work place.


 Additional Info

French URL
http://www.topsupports.com