Sormac BV

Huiskensstraat 68
Venlo,  LI 
Netherlands
http://www.sormac.nl

• Booth: 2361

Sormac: reliable, quality, knowledge

Sormac B.V. is a world-leading developer and manufacturer of machinery and processing lines for the fresh-cut industry.

We have a strong record in peeling machines for potatoes, carrots and onions and we are the most progressive supplier for washing and drying systems for (delicate) leafy vegetables. Sormac strives to create detailed perfection in design, construction and functionality, enabling you to deliver the best possible high quality end product to your customers.

 Press Releases

• Sormac centrifuge SC-940/NextGen: the undisputed number one centrifuge for leafy vegetables (Jul 08, 2019)

  The SC-940/NextGen distinguishes itself by delivering dryer product and a higher capacity, saves energy (20%) and is easy to clean. This centrifuge has an exceptionally open design with optimal accessibility for cleaning and maintenance. The drum has a completely smooth inner surface without a central axle or other parts which could damage the product. The patented drive with magnetic bearing support delivers steady and smooth operation in all circumstances. It is the ideal machine for carefully preparing products in order to meet the high demands of American consumers.

  Sal Tedesco, SunnySide:

  Why did I buy a Sormac centrifuge?

  I started my career in 1979 cutting lettuce using a batch dryer from Brothers out of California, and for our batch process we still use those type dryers. But when we decided to install

  continuous processing lettuce lines, we made a decision to try a Sormac.

  The installation went very smoothly. We increased our drying quality and our productivity. We have been operating it for about 6 months with near zero challenges, and with the very few challenges we have had, the service attention was outstanding to say the least.

  From my perspective, the Sormac dryer has been an outstanding choice. I would highly recommend this machine to anyone looking for a continuous drying system.

  Unique qualities
   

  The SC-940NextGen has several unique aspects:

  • Higher capacity
    The introduction of new motors has enabled the machine to accelerate and decelerate faster and run at a higher speed. This has resulted in a shorter and more efficient cycle with dryer product, thus increasing the production capacity.

  • Energy savings
    The energy released while decelerating the drum is fed back into the grid. In practice, this enables energy savings of up to 20%.

  • Better hygiene, easy cleaning
    The open design and improved accessibility has made the machine easier to maintain and to clean.

  • Unbalance control
    The risk of unbalance is inherent in all centrifuges. The SC-940NextGen has a patented unbalance control system that detects unbalance in good time and corrects it, leading to uniform drying results.

  • Simple construction
    The simple configuration and robust drive with magnetic bearing support ensure reliable operation. The smooth interior of the drum and the absence of a central shaft minimise the risk of the product being damaged.

  About Sormac

  Sormac is a globally leading specialist in the development and production of machines and processing lines for the vegetables processing industry. Not only does Sormac have a proven track record for its potato, carrot and onion peelers, but the company is also one of the most innovative suppliers of washing and drying systems for lettuce and leafy vegetables.

  Sormac aspires to perfection in design, construction and functionality, thus ensuring that customers will be able to deliver the best high-quality end produce possible.

• Sormac: A new generation of cutting machines! (Jul 08, 2019)

  The multifunctional FS-3600/Multicut cutting machine boasts an impressive production capacity of 3,600 pieces per hour, with very high cutting precision. This cutter enables various different kinds of fruit and vegetables to be cut into slices, wedges or sticks.  A remarkable aspect of this machine is its open framework with wing doors and a swivelling control cabinet. Through this new design, the FS-3600/Multicut has set a new standard for hygienic machine design. It is of interest to anyone who processes fruit or vegetables.

  The F-2000 is the FS-3600/Multicut's smaller brother. This machine is Sormac's response to market demand. This versatile machine is very easy to use: the operator places two products in the holders and then presses the start buttons on the side of the machine with both hands. The machine then cuts the products into the desired shape. After cutting, the product is placed on an optional conveyor belt. The easy-to-operate semi-automatic wedge and slice cutter F-2000 is suitable for 1,200 pieces of fruit and vegetables per hour. It is easy to maintain, easily accessible and easy to clean. Because it can process all kinds of fruit and vegetables, it is perfect for all environments where fruit or vegetables are cut.

  The design and execution of this new generation of cutting machines meet the quality standards that existing customers have come to expect from Sormac. “Sormac aspires to perfection in design, construction and functionality of all our machines. In this way, customers can be confident that they can deliver a perfect end product. "Our benchmark is the best end result", says Roy Lemmen, Sales Director  at Sormac B.V.

 Additional Info