Register By Clicking Here

Schedule Subject to Change Without Notice.

KJ Ketterling Enterprises, LLC

1025 Sawtooth Blvd
Twin Falls,  ID  83301

United States
Phone
208-280-0964
http://www.kjketterlingenterprises.com
  • Booth: 542


 Products

  • Klok-It
    Look like a pro, act like a pro, Klok-it like a pro.
    Klok-it not only repairs damaged boxes, our through door design allows for an additional secondary lock....

  • Look like a pro, act like a pro, Klok-it like a pro.

    Klok-it is a simple inexpensive solution limiting access to outdoor controllers to the professional. A simple stainless bracket that is able to repair damaged or broken lock tabs without having to replace the enclosure. The bracket is extended through the door allowing for a secondary lock providing the ultimate in protection from anything but total destruction of the controller its self.

    The end user -both the contractor and the homeowner -will use the Klok-it tool and any rotary cutter, to cut the slot into the clock cover.  Then slip the bracket into place and put the arm with tab through the cut and lock the clock with either the key to turn tab into the Klok-it bracket. With the addition of a self-locking nut and bolt, the original cam lock becomes tamperproof. Add a padlock to add extra security to the clock giving only the contractor or homeowner access.  The stainless steel bracket once in place provides a new tab that cannot be broken or pushed back to open the clock.

    With installation taking less than 10 minutes, and a multiple use installation tool, the Klok-it is able to solve a plethora of issues faced by our industry cheaply, efficiently, and permanently.  The sleek installation maintains the professional appearance of a well maintained subdivision or multifamily complex.

  • Kap-It
    Don't Dig-It, Kap-It, Snap-It, Lift-It, Raise-it, Sprinkle-it
    Clean around the top of the sprinkler cap. Unscrew the nozzle add the stem extender. Slide the Cap Extender over the stem and snap it down onto the existing cap. Replace the nozzle and align....

  • Don't Dig It, Kap-It, Snap-It, Lift-It, Raise-It, Sprinkle-It!

    All sprinkler heads need to be raised as the root and soil base rises around the head. Digging around the canister, and attempting to unscrew the canister from the riser is always a delicate procedure, and there is always a chance of the surround dirt filling the hole.  

    When a sprinkler is not above the grass blade height, even the most advanced water saving nozzles distribute water inefficiently. Blockage of the water stream causes increased water waste and run off.  As a standard cure to extend the life of risers that are too low, home owners start lowering the deck height of their mowers. This increases soil temperatures, increasing evaporation, and requiring extended water run times. There by increasing water needs.  By making it fast, and easy enough for anyone to raise their sprinkler heads, watering stays efficient, and distribution is maximized.

    Kap-It allows anyone to raise a sprinkler head from the top instead of from the bottom! By extending the stem of a standard riser, you have raised the height.  The new snap on top protects the stem extension, while leaving all of manufacturer’s original parts completely intact.  Kap-It keeps the rocks and debris normally introduced into the head when a sprinkler is unscrewed below ground. The snap on top is designed to still allow regular access to the inside of the head itself, by maintaining the ability to unscrew the top of the canister with the Kap-It, even when more than one is stacked.

    Simple, Secure, Fast, and Permanent jump up your nozzle with a Kap-It.


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".